







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Santa Rosa Owner’s Guide
We build and finish home additions and ADUs in Santa Rosa that incorporate Blanco fixtures and finishes, and the typical installed project runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. When a Blanco piece in an existing addition or converted garage fails, most owners find out the same way: a cracked sink basin or a loosened fixture flange in the ADU bathroom, water staining around a shower valve, or a vanity top that has started to delaminate at the edge where it meets the cabinet. The part itself is small. What it sits inside is not, and that is why the fix has to be scoped carefully rather than patched.
Which Blanco Models This Applies To

Blanco’s residential line is deep, and the parts don’t cross over cleanly. Their sink families include the undermount and drop-in lines in composite granite (Silgranit) and stainless, and the trim and mounting hardware differ by series and by bowl configuration. The reliable way to identify what you have is to pull the label from the underside of the sink or the inside of the cabinet door, note the model number and the bowl dimensions in inches, and photograph the mounting clips and drain opening. Measure the cutout, not the bowl. The rim overhang differs by series, and a part bought against the wrong dimension will not seat.
On OEM versus aftermarket: Blanco’s own replacement parts are the safest match, particularly for mounting hardware and drain assemblies where the tolerance is tight. Quality aftermarket equivalents exist for strainers, basket assemblies, and some trim, and they can save real money, but the fit has to be verified against your exact model, not a similar one. We’re an independent service provider and not affiliated with Blanco, so we match the part to the label and tell you plainly when the aftermarket option is a genuine equivalent and when it isn’t. For other finishes in the same addition, we also work with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
The failure modes in an addition or ADU are specific, partly because these spaces see different use than a main-house kitchen or bath, and partly because Santa Rosa’s summer heat and winter rain cycles work on seals and caulk lines year after year.
- Cracks or chips at the rim or drain opening. Composite granite can crack from thermal shock or a dropped object, and a chip at the drain is where a hairline becomes a leak. The cause is usually stress at a fastener or a hard impact, not a defect in the material.
- Water staining or softness around the fixture base. In an ADU bath, a failed seal lets water track under the fixture and into the subfloor. By the time you see staining, the damage has usually been running for a season or more.
- A loose or rocking fixture. Mounting clips work loose over time, especially where the cabinet or substrate wasn’t shimmed flat at install. Rocking puts stress on the drain connection and the rim.
- Discoloration or a chalky film that won’t clean off. On composite surfaces this can point to a finish that has worn through, and on metal trim it usually means the protective coating is gone. Cleaning harder makes it worse.
- A persistent drain or trap smell you can’t trace. Often a worn gasket or a seal that has hardened, not a clog. The fix is at the connection, not down the pipe.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Santa Rosa, replacing a Blanco fixture or component inside an addition or ADU typically falls in a modest band relative to the project that surrounds it. For a fixture swap with parts and labor, expect $450 – $1,800 depending on access and whether the substrate needs repair. A vanity or countertop replacement in the ADU bath runs $800 – $3,000. Where the failure has reached the subfloor or the wall behind a fixture, the repair widens toward $2,500 – $6,500. These are the numbers we put in writing before we start, and they sit inside the same larger range as the addition itself.
What drives the range: access to the fixture, whether the mounting surface is sound, and whether the replacement is OEM or a verified equivalent. Our written quote lists the part and the labor separately so you can see what you’re paying for. Every visit includes a documented photo record of what we found and what we did, and the work carries our 365-Day Done Right Promise.
DIY or Call Us?
You can safely check the label, photograph the mounting hardware, measure the cutout, and note whether the substrate under the fixture is soft. Those facts help us quote accurately and cost you nothing. Where DIY goes wrong is at the connections: a fixture that isn’t seated flat will leak at the drain or the rim, and by the time it shows, the subfloor is wet. On an addition or ADU, pulling a fixture can also expose framing and waterproofing that needs to be assessed, and that’s not a job to guess at. If you’re unsure whether the failure is surface or structural, call (833) 842-1866 and we’ll tell you what to look at before anyone touches a tool.
FAQs

Under normal use, expect 15 – 20 years from a composite Blanco sink or fixture, with the seals and mounting hardware needing attention sooner. In an ADU that sees heavy turnover or is used seasonally, the seal life shortens because the fixture sits dry for stretches and then takes concentrated use. Call (833) 842-1866 for an exact quote on a replacement, and the estimate is free.
Sometimes, yes. A loose mounting clip, a worn gasket, or a failed seal is a repair, not a replacement, and that’s often the honest answer. A crack that reaches the drain opening or a finish that has worn through is not repairable, and patching it just moves the leak. We’ll tell you which one you have after we look.
A straightforward fixture replacement in an ADU or addition is usually a single visit, and a vanity or countertop swap typically runs a day or two depending on the substrate. If the failure has reached the subfloor or the wall, the timeline extends by the repair, and we put that in the written scope before work starts.
We match the part to the model number on your Blanco label, then source the OEM component or a verified aftermarket equivalent, and we tell you which one we’re using and why. We don’t claim stock or carry parts on a truck. Our written price lists the part and the labor separately, and no work proceeds on a change until the change order is signed.
If a Blanco fixture has failed in your Santa Rosa addition or ADU, the fastest path to a real number is a call. We’ll review what’s failing, give you a flat written price before any work starts, and include a photo record of the visit. Call Rowan Construction Group Santa Rosa at (833) 842-1866 to schedule your free estimate.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












