







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Santa Rosa Owner’s Guide
KraftMaid bathroom installation and cabinet-related remodeling in Santa Rosa typically runs $9,000 – $28,000 installed, depending on how much of the room you’re touching and whether the vanity cabinet stays or goes. We install KraftMaid-compatible bathroom cabinetry and fixtures with a written flat price before work starts, and most non-structural vanity swaps schedule within a week or two, not same-day. Owners usually land here after a failure they can see and touch: a drawer box that sags open on its own, a soft-close hinge that clicks instead of glides, a cabinet front swollen at the bottom edge after a winter of Sonoma County humidity, or a laminate top lifting around the sink cutout.
Which KraftMaid Models This Applies To

KraftMaid builds bathroom vanities and linen cabinets across several door styles and finishes, and the parts aren’t universal. The compatibility gotcha most Santa Rosa owners trip over is the drawer box: KraftMaid uses more than one drawer system across its lines, and a replacement glide or box built for a three-quarter-extension system won’t seat correctly in a full-extension cabinet without the matching bracket and rear-mount geometry. Pull the top drawer all the way out and look for the manufacturer stamp on the underside of the steel rail or the side of the box, then match the box height (often around 3.5 to 4.5 inches) and the slide length in inches along the cabinet sidewall. Don’t trust the door style name alone; two vanities in the same finish can carry different hardware generations.
On the OEM-versus-aftermarket call: buy OEM for anything load-bearing inside the cabinet (drawer glides, the box itself, hinges at the door plate), because the mounting patterns are cut to KraftMaid’s specs and a generic glide often needs the cabinet side re-drilled, which weakens the panel. Aftermarket is fine for pulls, knobs, and top-cutout surrounds, where fit is forgiving. Where the cabinet panels have reached end of life, a replacement vanity body from a vetted line is the cleaner spend than chasing discontinued hardware. We also source Cambria, Silestone, and Kohler for the top and fixtures on the same job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Bathroom Remodeling Is Failing
Bathroom cabinetry fails differently than kitchen cabinetry: higher humidity, less airflow, harder daily use. What to watch for:
- Drawer glides bind or catch halfway out. The ball bearing race has lost its grease or a bearing cup is cracked, usually from repeated load and bathroom humidity cycling against the steel. A glide that catches instead of glides is the first symptom, not a nuisance.
- Soft-close hinges click, snap, or won’t hold the door shut. The damper cylinder inside the hinge has failed. Once it does, the door swings free and slams, which over time stresses the hinge plate screws in the cabinet stile.
- The cabinet bottom panel swells at an edge. Particleboard core wicks water from a slow toilet seal leak or a wet mop, and Sonoma County’s damp winters keep it wet. Swelling at the bottom front edge is the tell.
- The laminate vanity top lifts or delaminates around the sink cutout. Water behind the faucet or at the backsplash seam seeps under the laminate sheet, and the bond lets go at the edges.
- A cabinet face starts separating from the box at the corner. Loose screws, a dropped cabinet heel, or an uneven floor mean the box is racking, and the door and drawer fronts then fight their own alignment.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Santa Rosa, here’s what the money buys, in writing, before anything moves:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Bathroom vanity installation: $800 – $3,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
The range moves on scope: whether the cabinet stays and we swap hardware, whether the vanity body is replaced, whether the top needs a new Silestone or Cambria cut, and whether the shower pan gets touched (that’s the most expensive variable in any bathroom job). The quote is a flat written price with a written scope and a written warranty, not a range. If a product line is discontinued, the quote says what replaces it and why. The 365-Day Done Right Promise applies to the work: if it isn’t right, we make it right.
DIY or Call Us?
Safe to check yourself: pull each drawer fully out and read the stamped model on the glide, tighten the hinge plate screws a quarter turn at a time (don’t over-torque particleboard), and look under the sink cutout with a flashlight for water staining at the seam. That’s diagnosis, not repair, and it’s what we’d do first anyway.
Where DIY goes wrong: replacing a glide with a mismatched system and re-drilling the cabinet side, resealing a vanity top with silicone before the water source under it is found, and pulling a cabinet body yourself when a slow leak has softened the substrate. On bathroom work, moisture is the real problem, and a part swap that doesn’t address the source fails again within a season. Call (833) 842-1866 for a free estimate; the second opinion on another contractor’s written quote is free too.
FAQs

How long does KraftMaid bathroom cabinetry last? Fifteen to twenty years is realistic when the room ventilates and the cabinet stays dry; the glides and hinges fail first, usually inside ten years, and the box outlives them in most Santa Rosa homes. Call (833) 842-1866 for an exact quote – estimates are free.
Can the failing part be repaired instead of replaced? Often yes. Hinges and pulls usually replace outright; drawer glides can sometimes be re-greased or re-seated if the bearing race is intact; a swollen panel or delaminated top is a replace, not a repair. We inspect and quote both paths.
How long does the swap take? A glide or hinge change is a short visit, often under two hours. A vanity body or top replacement is typically a half to full day, plus lead time on the box or top itself.
How do you source the part? We match the stamped model and measurements, then order through vetted suppliers and lines – KraftMaid for compatible cabinetry, plus Cambria, Silestone, or Kohler for tops and fixtures – and we don’t carry parts on a truck, so the right box shows up for the right cabinet.
Rowan Construction Group Santa Rosa is an independent service provider and is not affiliated with, sponsored by, or endorsed by KraftMaid.
Call (833) 842-1866 for a free estimate. Bring a competitor’s written quote and we’ll review it line by line, at no charge.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












