







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in San Anselmo, CA
We provide independent CWS service across San Anselmo, from full kitchen remodeling and cabinet installation to quartz and granite countertop work, for homeowners whose hillside houses put real demands on cabinetry. The one thing that makes our CWS work different here: most of these kitchens sit on lots where the ground moves, so the cabinet installation has to be right before the first box is set. We are not authorized, endorsed, or affiliated with CWS. Call (833) 842-1866 for a free written estimate.
Why San Anselmo Residents Choose Us for CWS Service

We know CWS cabinetry because we work on a lot of it. The Aurora, Summit, Metro and Classic lines each have their own hinge patterns, box construction and finishing details, and knowing which glide or hinge a given line takes is the difference between a door that closes flush for years and one that rubs the frame within a season. We use OEM-compatible hardware where fit and finish matter and explain plainly when a quality aftermarket part does the same job for less on an older line.
What sets our San Anselmo work apart is that we treat your build as the problem before we treat the cabinets. Hillside houses around Sleepy Hollow and the streets above downtown have old framing, older plumbing, and ground that shifts with the seasons. That shapes how we install and repair CWS here, and we say what we see rather than what we feel about it. Every visit includes a documented photo record, and calls reach a live person around the clock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in San Anselmo
- Cabinet box swelling and delamination from seasonal humidity swings. Unventilated hillside kitchens trap summer moisture and winter damp, and the particleboard core of an older box takes it hard. Once the core swells, the finish lifts at the seams and doors stop sitting square.
- Drawer glide failure and hinge misalignment on older CWS Metro and Classic lines. Years of daily use wear the glide tracks and open the hinge screw holes. On sloped floors the cabinet run racks and the wear accelerates. We replace glides and hinges and re-shim the run back to level.
- Countertop seam separation and edge chipping from foundation movement. San Anselmo’s clay soils move seasonally, and a rigid quartz or granite top has nowhere to give. Seams open and edges chip where the cabinet run shifts underneath.
- Finish cracking and peeling on cabinet faces in summer sun. Older single-pane windows let intense summer sun land on the same cabinet faces day after day. The finish checks and peels in those spots first, so we flag exposures during the estimate.
- Unpermitted past additions surfacing mid-remodel. Many San Anselmo bungalows carry work from previous owners that was never signed off, and it shows up when walls open. We look for it early and put it in writing before it changes the scope.
CWS Service in San Anselmo: What Local Conditions Mean for Your Equipment
Here is the local reality that shapes every CWS cabinet job on our side of town. On the hillside streets above downtown and out toward Sleepy Hollow, the redwood deck footings many of these houses sit near are pinned into clay that swells and shrinks with the seasons. So a kitchen or bath remodel that opens the floor or an exterior wall routinely turns into a geotechnical review and a drainage upgrade before a single cabinet box can be installed safely. That is not a story we tell to pad a scope. It is a Town of San Anselmo and Marin County reality on steep wooded lots, where hillside ordinances and geotechnical review are normal parts of the process. CWS cabinetry installed on a floor that is quietly moving will rack, misalign at the doors, and open at the countertop seams no matter how well the boxes were made. We check the slope and the moisture first, then set the cabinets.
CWS Models & Products We Service in San Anselmo
We work on the full CWS cabinet and countertop range, including the Aurora, Summit, Metro and Classic lines, alongside quartz and granite tops. For hardware, OEM parts are our preference on CWS cabinets because they keep the fit and finish exact. On older Metro and Classic lines, high-quality aftermarket glides and hinges are a reliable, cost-effective option, and we say so when they are the better call. Repair is often viable for boxes and frames. Delaminated or water-damaged cabinets usually justify replacement, and we show you why with the photo record. Parts are sourced per job; we don’t claim to stock anything locally.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in San Anselmo

What drives cost here is slope and access first, then scope. A cabinet run that needs re-leveling and re-shimming on a moving floor takes more time than the same run on a flat slab, and any drainage or geotechnical work that surfaces goes in as a signed change before it proceeds. Every project gets a flat written price and written scope before work begins, on every trade.
| Service | Typical Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Remodel | $9,000 – $28,000 |
A free estimate includes the written scope, a line-item price, and a walk-through of what we found. Call (833) 842-1866 for your estimate.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in San Anselmo
Do CWS cabinets require special installation in San Anselmo’s hillside homes? Yes. In hillside homes, cabinet installation usually starts with checking the slope and moisture where the run will sit, because cabinetry on a moving floor will rack regardless of brand. We address the ground and drainage issues first, then install.
Why do CWS cabinet doors stick or misalign in San Anselmo? The usual cause is seasonal ground movement and drawer glide wear, not the cabinet itself. As the floor shifts and the hardware loosens, the run racks and doors rub. We re-shim and re-level the run and replace worn glides and hinges. Call (833) 842-1866 to book an assessment.
Can I replace just the doors and drawer fronts on my CWS cabinets? Often, yes, if the boxes and frames are sound. If the boxes are swollen or delaminated from moisture, new fronts won’t fix the problem and replacement makes more sense. The free estimate tells you which situation you’re in.
What countertop material works best with CWS cabinets in San Anselmo’s climate? Quartz and granite both work well, provided the cabinet run is level and the seams are set with flexible adhesive and new seals. On moving clay, the seams are where failure shows first, so the installation matters more than the material.
Are there fire-safe requirements for kitchen remodels in San Anselmo’s wildland-urban interface? Yes. Marin County fire-safe and hillside ordinances apply on wooded lots, covering ember-resistant vents and defensible space. We flag what applies to your project during the estimate. Call (833) 842-1866 for a free quote.
Service Areas Near San Anselmo
We serve homeowners across San Anselmo and the surrounding area, and you can see our full San Anselmo service area page for coverage details. Nearby we also serve San Rafael, Larkspur, Novato, Petaluma and Santa Rosa. For our wider CWS expertise, see CWS service.
Book Your CWS Service in San Anselmo Today
If your CWS cabinets are sticking, your countertop seams are opening, or you’re planning a kitchen remodel on a hillside lot, call (833) 842-1866 for a free written estimate. We’ll walk the space, check the slope and moisture, and leave you with a line-item price and a documented photo record.
Written by the team at Rowan Construction Group Santa Rosa.












