







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose Unilock Construction
We provide independent Unilock construction service in Santa Rosa: paver patios, paver driveways, driveway replacement, and Unilock retaining wall repair and installation. What separates our Unilock work is that we treat the system, not just the surface. We check base depth, compaction, edge restraint and drainage behind every failure, because in Santa Rosa the paver almost never causes the problem – the assembly under it does. We’re upfront that we’re an independent contractor. We’re not affiliated with or authorized by Unilock, and we don’t imply we are. Our credibility comes from reading Unilock’s own installation specs, handling real Brussels Block, Cambridge and U-Cara wall assemblies, and repairing work done by others. Call (833) 842-1866 for a free estimate.
Why Trust Rowan Construction Group Santa Rosa for Your Unilock Construction?

Unilock publishes detailed installation specs for each of its systems, and most failures we see in Santa Rosa trace back to a crew that skipped a step in them. Our technicians have up to 19 years of experience with that spec sheet in hand. They know what base aggregate Unilock calls for under a Cambridge driveway versus a Brussels Block patio, how deep the base course needs to sit for a Lineo wall, and where the edge restraint has to be spiked to hold.
We use genuine Unilock pavers, wall units and matching edge restraints whenever a repair needs to blend into existing courses. Matched aftermarket polymeric sand and base aggregate are fine where Unilock doesn’t specify a proprietary product, and we’ll tell you which is which before we quote the job.
Warranty-safe practice is part of the discipline. That means the compaction, drainage gravel and geogrid the manufacturer’s spec requires, so a future claim doesn’t get denied on installation grounds. Under the Haven Standard, we put the price in writing before anyone picks up a tool, and no change proceeds without a signed change order. Every visit also includes a documented photo record as a standard deliverable, so you see what we found under the pavers, not just what we said about it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Santa Rosa
These five failures come up again and again on Unilock installations around Santa Rosa. Each has a cause you can point at.
- Polymeric sand joint loss on Brussels Block and Cambridge pavers. Joints wash out and weeds push through when the base aggregate was never compacted in lifts. Loose base lets the pavers shift underfoot, which opens the joints the sand sits in, and every rain takes more of it.
- Efflorescence and color fade on ArmorTec pavers. The ArmorTec surface layer itself holds color, but a sealer applied over damp pavers, or the wrong sealer for that paver, traps moisture and drives salt bloom to the face. It’s an application mistake, not a bad paver.
- Edge restraint failure and paver creep on driveways. Where the edge restraint wasn’t spiked into a compacted base per Unilock spec, the outside course walks outward, one row leans, and the whole driveway starts to open up from the edge.
- Retaining wall bulging on U-Cara and Lineo systems. A wall that leans, settles or bulges is usually missing geogrid, sitting on a base course that’s too shallow, or has no drainage gravel behind the face. Water pressure builds behind the wall, and the face can only hold so long.
- Rocking pavers over a sound-looking surface. A patio that looks fine up top but rocks in spots points to thin base or skipped geotextile separating the base from native soil. Pulling one paver tells the whole story.
A typical Unilock call here starts with a patio or driveway where the joints are washing out, pavers are rocking, and weeds are coming through. Nearly always it’s a base that was never compacted in lifts or edge restraint that was never spiked to spec. A qualified installer pulls a section, checks base depth and compaction, confirms the paver type, resets the base with proper aggregate and geotextile if needed, re-lays the field, and re-sands with spec-grade polymeric sand after the pavers are dry. On retaining walls, the same crew inspects for missing geogrid and drainage gravel behind the wall before rebuilding the face.
Unilock Parts & Our Repair-vs-Replace Approach

Matching pavers matter for a repair. Unilock’s color lots shift over the years, so blending into an existing Brussels Block or Cambridge field takes knowing the current line and being honest if the match will show. We source genuine Unilock pavers and wall units for the repair when a blend is needed, and use matched aftermarket polymeric sand and base aggregate only where Unilock doesn’t specify a proprietary product. We don’t claim to stock Unilock parts locally. Each job gets sourced to the right part for that installation, not whatever happens to be on hand.
Repair versus replace is a judgment about the base, not the pavers. If the base and edge restraint are sound, a repair is honest: reset the field, re-establish the edge, re-sand properly. If the base was never built to Unilock spec, patching pavers only delays the failure, and a full reset of the assembly is the real fix. We’ll show you the section we pulled and tell you which one you’re looking at. Call (833) 842-1866 and we’ll give you a written price before any work starts.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We pull a section and check base depth, compaction, edge restraint and, on walls, drainage and geogrid. We confirm the paver type (Brussels Block, Cambridge with ArmorTec, Beacon Hill, or U-Cara/Lineo wall units) so the repair matches.
- 2
Repair or install. We reset the base with proper aggregate and geotextile, re-establish and spike the edge restraint to Unilock spec, then re-lay the field or build the new assembly. On walls we rebuild the face only after adding missing geogrid and drainage gravel.
- 3
Confirm the finish. We re-sand with spec-grade polymeric sand once the pavers are dry and check the surface drains away from the house and out of the joints. The photo record documents each stage.
- 4
Written warranty. You get the flat written price, the scope, and the warranty in writing. If it isn’t done right within the 365-Day Done Right Promise, we make it right.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Santa Rosa
We work across the core Unilock hardscape lines Santa Rosa homes actually carry. That includes Brussels Block pavers for patios and walkways, Cambridge Pavingstones with ArmorTec for driveways and heavy-traffic surfaces, Beacon Hill Flagstone for patios and pool decks, and the Lineo and U-Cara retaining wall systems. Alongside those, we handle the sub-services most Unilock calls land on: paver patio installation, paver driveway installation, and driveway replacement. Santa Rosa sits in a Mediterranean climate with bone-dry summers, so we schedule exterior paver and wall work for spring and early summer, when the base and the pavers are dry enough for polymeric sand to set correctly.
We Also Service These Brands
Unilock is one brand among many we handle, which means the written quote reflects honest numbers rather than inflated ones. We also work with KraftMaid and Cambria in kitchens, Silestone quartz surfaces, and Kohler fixtures on the interior side. If your project touches several trades, one written scope covers all of it.
FAQs – Unilock Construction Service in Santa Rosa

No. We’re an independent Unilock service provider and we’re not affiliated with or authorized by Unilock. We install and repair Unilock systems to the manufacturer’s published specs, but any authorization or material-question claims belong to Unilock. Call (833) 842-1866 to schedule a free estimate.
Yes, when a repair needs to blend with existing Unilock courses. We source genuine Unilock pavers, wall units and matching edge restraints for the job. Matched aftermarket polymeric sand and base aggregate are fine where Unilock doesn’t specify a proprietary product, and we’ll tell you which part each line item is.
A paver repair or reset usually runs a day or two; a full paver driveway installation takes longer and depends on base work and drying conditions. Santa Rosa’s dry-season window helps, since polymeric sand needs dry pavers to set. Call (833) 842-1866 and we’ll put the timeline in writing with the price.
We cover Brussels Block, Cambridge Pavingstones with ArmorTec, Beacon Hill Flagstone, and the Lineo and U-Cara retaining wall systems. That includes paver patios, paver driveways, and driveway replacement built on those lines.
Not if the work follows Unilock’s installation specs. Following the spec on base compaction, edge restraint, drainage gravel and geogrid is exactly what keeps a future material claim from being denied on installation grounds. We document each stage with a photo record so the install is verifiable. Call (833) 842-1866 for a free second opinion on any written estimate.
Most Santa Rosa Unilock work lands in these ranges, with the exact flat price written before any work starts:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Call (833) 842-1866 for an exact quote – estimates are free.
Usually, yes, but color lots shift over the years, so a blend can show. We source genuine Brussels Block for the repair and tell you honestly how close the match will be before we start. Call (833) 842-1866 for a written price.
The base was likely never compacted in lifts, so the pavers shift and open the joints. The fix isn’t more sand – it’s resetting the base and re-establishing the edge restraint to Unilock spec, then re-sanding with spec-grade polymeric sand once the pavers are dry. Call (833) 842-1866 for an exact quote.
In most cases, yes. Our soils and drainage conditions make geogrid and drainage gravel behind the wall part of a sound build, not an optional extra. A wall bulging or settling is usually telling you one or both is missing. Call (833) 842-1866 to schedule a free estimate.
Sometimes, when the base and edge restraint are sound and the failure is localized. If the base was never built to spec, a partial patch only delays the failure and a full reset is the honest call. We’ll pull a section and show you which you’re facing. Call (833) 842-1866.
ArmorTec adds a dense surface layer that holds color and resists wear, which matters on a driveway. The trade-off is that it’s a finished face, so applying the wrong sealer over damp pavers can drive efflorescence and fade. We’re careful about sealer choice and timing. Call (833) 842-1866 for a written price.
Book Your Unilock Service in Santa Rosa, CA
If your Unilock patio, driveway or retaining wall needs a real diagnosis, we’ll pull a section, tell you what we found, and put a flat written price in front of you before any work starts. Every visit comes with a documented photo record, and the 365-Day Done Right Promise backs the work. Call (833) 842-1866 to schedule your free estimate in Santa Rosa.
Written by the team at Rowan Construction Group Santa Rosa.












