A Rowan company - serving Santa Rosa, CA
A living room with a wall of new windows and a sliding glass door
CGI · Santa Rosa

CGI Construction Service in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A new multi-panel patio door opening a kitchen to the patio
New double-hung windows in a dining room
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Santa Rosa Homeowners Choose CGI Construction

Rowan Construction Group Santa Rosa provides independent CGI construction service in Santa Rosa: cabinet installation, quartz countertop work, vanity top replacement, and tub-to-shower conversions, quoted at a flat written price before anyone picks up a tool. What sets our CGI work apart is diagnostic familiarity. Our technicians have handled CGI frameless and Shaker cabinetry and CGI quartz in enough Santa Rosa homes to know how these products actually behave here, not how they read on a spec sheet. We’re an independent service provider. We are not affiliated with or authorized by CGI, and we don’t imply otherwise. The city’s fire-hardening permit cycles and dry-season humidity swings put specific stresses on cabinetry and countertops, and that’s where our CGI work earns its keep. Call (833) 842-1866 for a free estimate.

Call (833) 842-1866

Why Trust Rowan Construction Group Santa Rosa for Your CGI Construction?

A new bay window with a cushioned seat

Our technicians have up to 19 years of experience, and a good share of it has been spent inside CGI cabinet boxes and under CGI quartz slabs. That matters because frameless European cabinetry and engineered quartz fail in ways that a general carpenter may recognize but not diagnose. A door that hangs crooked is a hinge problem, a swelling problem, or a racking problem, and each one calls for a different fix and a different price.

We source CGI OEM hinges, drawer slides, and touch-up finishes whenever they’re available, because OEM hardware preserves the fit and the finish match. When a component is discontinued, we use quality aftermarket equivalents and say so in writing before the work starts. Every CGI service call is warranty-safe: we don’t drill, cut, or modify a cabinet or countertop in a way that would give CGI grounds to deny a claim, and we put that commitment in the scope.

Under Clause 1 of The Haven Standard, the price is written before anyone starts. No change proceeds without a signed change order. Crews are background-checked and uniformed, calls are answered by a live person 24/7, and every visit ends with a documented photo record of what we found and what we did. The 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right. And if you want a second set of eyes on a competitor’s CGI estimate, we’ll review it line by line at no charge.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Fix in Santa Rosa

CGI products are well made. Most of what we repair in Santa Rosa isn’t a manufacturing defect; it’s what a Mediterranean climate with bone-dry summers and hot, gusty autumn winds does to wood-core cabinetry, plus the ordinary wear of a working kitchen. These are the five patterns we see most.

  • Sagging or misaligned doors on CGI Euro-style frameless cabinets. Frameless boxes rely on the hinge plate and the panel edge for their alignment, with no face frame to hide error. When hinges fatigue, doors drift out of plane and start rubbing. In Santa Rosa, the bigger culprit is usually moisture: a dishwasher or sink leak swells the particleboard core, the hinge screws lose their bite, and the door sags no matter how many times you adjust it. The fix depends on whether the swelling is local or has spread through the box.
  • Hairline cracks in CGI quartz near sink cutouts or overhangs. Quartz is strong in compression and surprisingly unforgiving in flex. A cutout for an undermount sink removes material exactly where the slab needs it most, and an overhang beyond about a third of the slab’s depth without corbels or a steel support puts a bending load on the weakest section. Cracks usually start at the cutout corner. That’s a support problem, not a bad slab, and the repair has to address both.
  • Finish peeling or chipping at joints on CGI Shaker cabinets. Painted and foil-wrapped Shaker fronts move with humidity. Santa Rosa’s swing from wet winter to parched summer works the joints, and repeated wiping with harsh cleaners accelerates it. Blistering near the dishwasher or range is a tell that moisture or heat, not cleaner, is the driver.
  • A CGI vanity top separating from the cabinet base. Vanity tops lift when the adhesive bead was too thin or when water gets behind the backsplash and swells the cabinet’s top rail. Once the top is loose, water finds the seam every time someone uses the sink, and the separation widens.
  • Drawer slides that bind or self-open. On CGI frameless cabinets, a slide that binds usually means the box is out of square from settling or moisture, not that the slide failed. We check the box before we replace hardware, because a new slide in a racked cabinet will bind too.

CGI Parts & Our Repair-vs-Replace Approach

Installers setting a new window and checking it for level

Parts come from the manufacturer or an approved supplier for each job. We don’t claim to stock CGI parts locally, and we won’t tell you we do. When you book a CGI service call, we identify the specific model or series, confirm what hardware it takes, and order it. That’s a day or two on most jobs.

OEM first is our default for hinges, slides, and touch-up finishes, because a hinge that matches the original keeps the door reveal even and the warranty intact. If CGI has discontinued a component, a quality aftermarket equivalent is fine, and we’ll name the part in the written scope so there’s no mystery later.

The repair-or-replace call is honest and specific. CGI cabinets and countertops are usually repairable when the substrate is sound: hinges and slides swap cleanly, a hairline quartz crack can be stabilized once the support is corrected, and a lifting vanity top can be reset with proper adhesive and a flashing detail. We recommend replacement when the particleboard core has swollen through the box, or when a countertop has multiple cracks radiating from more than one point. At that stage, patching is money spent on a problem that keeps coming back.

Call (833) 842-1866 and we’ll give you a written price on both paths so you can compare them side by side. Estimates are free.

Our CGI Service Process – Step by Step

Here’s what a typical CGI job looks like with us, start to finish.

  1. 1
    Diagnosis. We open the cabinet, check the box for square and moisture, test the hinge plates, and look at the countertop’s support and cutout corners. We photograph everything. A common scenario: a homeowner notices several CGI frameless cabinet doors no longer close flush and the finish is blistering near the dishwasher. The usual cause is moisture swelling the particleboard core and fatigued hinges. We confirm the extent of the swelling before recommending anything.
  2. 2
    Written scope and price. You get a flat written price, the exact parts list (OEM or named aftermarket), and the repair-or-replace recommendation with the reasoning. No work starts until you approve it.
  3. 3
    Repair or install. We replace damaged hinges and slides with OEM or equal hardware, correct the countertop support before any crack repair, and reset vanity tops with proper adhesive and a water detail at the back edge. If a full replacement is the right call, we scope cabinet installation, countertop installation, and backsplash as one job.
  4. 4
    Test and warranty. Doors are adjusted and cycled. Drawers open and close under load. The countertop is checked for flex. We hand you the photo record and the written warranty, and the 365-Day Done Right Promise covers the work.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Products We Service & Install in Santa Rosa

We work across the CGI lines that show up in Santa Rosa kitchens and baths: Euro-style frameless cabinets, Shaker-style cabinets, quartz countertops, and vanity tops. On the installation side that covers full cabinet installation, quartz and granite countertop fabrication and setting, backsplash, bathroom vanity installation, and tub-to-shower conversion when a bath is being reworked around new surfaces. We handle projects in the mid-century ranch homes of Coffey Park and Roseland as readily as the 1970s-80s hillside contemporaries in Rincon Valley, where out-of-square walls and settled floors are part of the measurements.

We Also Service These Brands

CGI is one of more than fifty vetted brands we work with. We also install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone quartz alongside CGI quartz, and Kohler and Toto fixtures. That range matters on a real job: when a client wants a Cambria island paired with CGI perimeter cabinets, we quote both in one scope instead of sending you to a second contractor.

FAQs – CGI Construction Service in Santa Rosa

New painted shaker cabinets with an organized deep drawer

Service Price Range
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Tub-to-Shower Conversion $3,500 – $10,000
Bathroom Vanity Installation $800 – $3,000

A full kitchen remodel in Santa Rosa typically runs $14,000 – $45,000, and a bathroom remodel $9,000 – $28,000, depending on how much of the CGI product stays and how much is replaced. Call (833) 842-1866 for an exact quote on your project. Estimates are free, and we’ll review a competitor’s written estimate line by line at no charge.

Book Your CGI Service in Santa Rosa, CA

If your CGI cabinets, quartz, or vanity tops need attention, call Rowan Construction Group Santa Rosa at (833) 842-1866. You’ll get a flat written price before any work starts, a photo record when the crew leaves, and the 365-Day Done Right Promise behind the job. Free estimates, and a free second opinion on any written estimate you bring us.

Written by the team at Rowan Construction Group.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new white vinyl privacy fence with a double gateA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodel

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch