







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose Delta Construction
Rowan Construction Group Santa Rosa provides independent Delta construction service in Santa Rosa: we repair and install Delta Monitor valves, single-handle faucets, and shower trim every week, and we quote a flat written price before any work starts. What sets our Delta work apart is troubleshooting that starts at the cartridge and the diverter, not at the tile. We’re an independent Delta service provider, not a Delta-authorized dealer or warranty provider, and we say so plainly. Our technicians work on Delta fixtures in Coffey Park ranches, Fountaingrove hillside contemporaries, and pre-1950 craftsman homes in the JC and Railroad Square neighborhoods. Call (833) 842-1866 for a free estimate.
Why Trust Rowan Construction Group Santa Rosa for Your Delta Construction?

Delta fixtures are not complicated, but they fail in specific ways, and knowing those ways is the whole job. Our technicians have up to 19 years of experience, and that includes pulling Monitor 13/14 cartridges with the manufacturer’s extraction tool rather than a pair of pliers, matching RP repair kits to the correct valve generation, and telling the difference between a cartridge that’s worn and a valve body that’s scaled past saving.
We install genuine Delta OEM cartridges, RP repair kits, and trim. Aftermarket cartridges look identical in the box and often fit loose; we’ve seen them start dripping again inside a year, and we won’t put one in your wall. When it comes to warranty-safe work, we document what we find and what we install with a photo record on every visit, so if Delta ever asks for evidence during a finish or parts claim, you have it. We’re not authorized by Delta and we don’t perform warranty service on their behalf – what we do is service the fixture correctly and leave you the paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Santa Rosa
Santa Rosa’s water is hard, and hard water is the single biggest reason Delta fixtures fail early here. These are the calls we field most often.
- Monitor 13/14 Series cartridge wear and scale. The pressure-balance cartridge builds mineral scale until the handle stiffens and temperature drifts – you set it warm and get lukewarm. Left alone, the scale wears the cartridge seals from the inside.
- Diverter spool failure on Monitor 13/14 valves. The shower head and the tub spout run at the same time, or the handle won’t hold the shower position. The diverter spool has failed, and it’s a separate part from the cartridge – we check both before quoting.
- Ceramic disc cartridge drip on single-handle faucets. Delta Foundations kitchen and lavatory faucets develop a slow drip at the spout when the ceramic disc cartridge wears or traps grit. It’s a cartridge swap, not a faucet replacement, in most cases.
- Finish pitting on lower-tier chrome and Brilliance stainless trim. Humid bathrooms and Santa Rosa’s hard water attack plated finishes, especially where water sits on the escutcheon. Pitting is cosmetic until it reaches the valve body, and that’s the line where repair stops making sense.
- In2ition hand-shower mode sticking. The two-in-one shower head’s diverter button wears and stops switching cleanly between the fixed spray and handheld. The internal diverter is replaceable, and replacement is usually the honest answer once the housing is scaled.
Delta Parts & Our Repair-vs-Replace Approach

For any Delta valve still under its original finish, genuine OEM parts are the right call: the correct cartridge for the valve generation, the matching RP repair kit, and trim that seals to the escutcheon the way it did when it left the factory. We source parts per job and don’t claim to stock Delta inventory locally – what we do is identify the exact part number before the crew arrives.
The repair-vs-replace decision is where a lot of money gets spent badly. If the valve body is sound, we repair. If the body is corroded, or a 1990s-era Monitor is coming out during a shower remodel anyway, upgrading to a current Delta pressure-balance valve is usually smarter than chasing discontinued parts. We’ll tell you which one you’re looking at, in writing, before anyone picks up a tool. Call (833) 842-1866 and we’ll review what you’ve got – estimates are free.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We pull the handle and trim, identify the valve series, and test for cartridge scale, diverter spool failure, and body corrosion. You get a written finding, not a guess.
- 2
Repair or install. Genuine Delta OEM cartridge, RP kit, or trim goes in. For a tub-to-shower conversion or walk-in install, the rough-in, valve, and waterproofing go in to spec with the Delta valve set at the correct depth.
- 3
Test. We run hot and cold, check the pressure-balance response, confirm the diverter holds, and verify no weeping at the trim escutcheon or valve body.
- 4
Documentation. You get a documented photo record of what we found and what we installed, the written scope and warranty terms, and a signed change order for anything that changed.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Santa Rosa
We work on Delta Monitor 13 and 14 Series tub-and-shower valves, Foundations single-handle kitchen and bath faucets, Lahara and Windemere widespread lavatory faucet collections, and In2ition two-in-one shower heads. On the remodel side, we install Delta pressure-balance shower valves and trim during tub-to-shower conversions, walk-in shower builds, and frameless glass enclosure projects – the work Santa Rosa homeowners actually book when a tired tub-shower has run its course. Whether it’s a cartridge swap or a full shower replacement, the valve and trim get set correctly the first time so the finish and function hold.
We Also Service These Brands
Delta is one brand in a full bathroom and kitchen picture, and we work across the others too: KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures alongside Delta. Multi-brand capability means we can service your Delta valve during a shower remodel and handle the vanity, countertop, or cabinet work in the same project – one written quote, one scope, one warranty. Call (833) 842-1866 for a free estimate.
FAQs – Delta Construction Service in Santa Rosa

No. We’re an independent Delta service provider, not a Delta-authorized dealer, and we don’t perform warranty service on Delta’s behalf. We service and install Delta fixtures to manufacturer specifications and document the work for your records.
Yes. We install genuine Delta OEM cartridges, RP repair kits, and trim. Aftermarket cartridges often fit loose and fail within a year, so we don’t use them. We source the exact part number per job and confirm it before the crew arrives.
A cartridge or diverter replacement on a Monitor 13/14 valve is typically a short visit once the correct part is on hand. Tub-to-shower conversions and walk-in shower installations run several days to a couple of weeks depending on scope. Call (833) 842-1866 for a written timeline and flat price.
Monitor 13 and 14 Series tub-and-shower valves, Foundations single-handle kitchen and bath faucets, Lahara and Windemere widespread lavatory collections, and In2ition shower heads. If you’re unsure which series you have, we identify it during diagnosis.
Proper installation of genuine Delta OEM parts does not void a Delta warranty, but we can’t speak for Delta’s determination on any claim since we’re independent. We document every visit with a photo record so you have evidence if you file a claim.
Delta repairs and shower-related work in Santa Rosa fall in these ranges, with a flat written price before work starts:
| Service | Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Call (833) 842-1866 for an exact quote on your Delta fixture or project – estimates are free.
Book Your Delta Service in Santa Rosa, CA
Whether it’s a scaled Monitor cartridge, a failed diverter spool, or a tub-to-shower conversion planned around a new Delta valve, you’ll get a flat written price before any work starts and a documented photo record when we’re done. Call Rowan Construction Group Santa Rosa at (833) 842-1866 to schedule your free estimate.
Written by the team at Rowan Construction Group Santa Rosa.












