







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose Toto Construction
Rowan Construction Group Santa Rosa provides independent Toto service, from single-fixture repairs to full bathroom remodels built around Toto fixtures. What sets our Toto work apart is brand-specific diagnosis: we read Toto’s part diagrams and know the Eco Ultramax fill-valve O-ring and the Washlet control board as named failure points, not guesses. We cover Santa Rosa, including Coffey Park, Fountaingrove, Rincon Valley and the older Railroad Square and JC stock. We are an independent Toto service provider, not affiliated with or authorized by Toto. Call (833) 842-1866 for a free estimate.
Why Trust Rowan Construction Group Santa Rosa for Your Toto Construction?

Our technicians have up to 19 years of experience, and that experience shows in how we handle Toto specifically. We work from Toto’s own spec sheets, part diagrams and service bulletins, so we know which fill valves and flappers belong in a Drake versus an Eco Ultramax, and how a Vespin II tank seals differently from a two-piece install. Because we’re independent, we recommend the right part for your model and your water conditions, OEM or quality aftermarket, without a brand mandate pushing the choice.
Every Toto job moves under the same documented process we apply across all seven of our trades. You get a written price and written scope before any work starts (Clause 1 of The Haven Standard). No change proceeds without a signed change order. Every visit includes a documented photo record as a standard deliverable, not an add-on. Crews are background-checked and uniformed, and a live person answers calls 24/7. Our 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right. Bring a competitor’s written estimate and we’ll review it line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Santa Rosa
Santa Rosa’s water carries enough mineral content that Toto internals wear in particular ways. These are the failures we see most, and what actually causes them.
- Eco Ultramax (MS854114E) fill valve O-ring degradation. The fill valve’s O-ring hardens and loses its seal, so the tank refills slowly or the toilet “ghost flushes” with no one touching it. It’s a cheap part with an outsized symptom, and the O-ring is usually the culprit before anything major.
- Drake (CST743E / CST776E) flapper seal hardening. The flapper loses its flexibility and stops sealing, so water trickles past and the toilet runs intermittently. Mineral buildup accelerates it. Left alone, a running Drake quietly adds to a Santa Rosa water bill month after month.
- Washlet (S500e / S550e) control board or seat sensor failure. Power surges and moisture intrusion knock out the control board or seat sensor, leaving a Washlet that beeps, won’t hold power, or stops responding to the remote. These are electronics, not plumbing, and the diagnosis is different.
- Tank-to-bowl gasket compression leaks on two-piece models. After years of compression, the gasket between tank and bowl flattens and seeps, showing as water at the base or a slow drip down the bowl. It’s common on older two-piece Toto installs and worth catching before the subfloor notices.
- Valve and tank wear on toilets past 15 years. On older Toto units, a major fill-valve or tank repair starts competing with replacement on cost. We lay out that math honestly rather than selling a repair that doesn’t pay off.
Toto Parts & Our Repair-vs-Replace Approach

We favor OEM Toto fill valves, flappers and gaskets for longevity, because the fit and material durability hold up. For out-of-warranty repairs where budget matters, quality aftermarket parts are a fair call, and we’ll say so. We don’t claim to stock Toto parts locally; we source the correct part for your model, which sometimes means a short wait for an exact-fit OEM component.
Repair versus replace is a cost decision, not a sales pitch. If your Toto toilet is over 15 years old and needs a major valve or tank repair, we put the repair number next to a replacement range so you can see where the money lands. If the fixture is otherwise sound, we repair. If the math favors replacement, we tell you. Call (833) 842-1866 and we’ll walk through your options; estimates are free.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We shut off the supply, drain the tank, and inspect the fill valve, flapper and tank-to-bowl gasket for mineral buildup or hardening. On a Washlet, we check power and moisture at the control board and seat sensor.
- 2
Written price and scope. Before any part is ordered, you get a flat written price with the scope spelled out. That’s Clause 1 of The Haven Standard, and it applies to a $40 flapper the same as a remodel.
- 3
Repair or install. We replace the failed component with the OEM or quality aftermarket part we agreed on, verify the tank-to-bowl gasket, and set the fill level correctly. Any change gets a signed change order first.
- 4
Test the flush cycle. We run the flush and refill to confirm no ghost flushing and no seeping at the base, and photograph what we found and what we did for your photo record.
- 5
Warranty and the 365-Day Done Right Promise. The written warranty goes with the job, and if something we touched isn’t right within the year, we make it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Santa Rosa
We service and install the Toto lines we’re asked about most in Santa Rosa: the Eco Ultramax (MS854114E) and Drake (CST743E / CST776E) toilets, the Vespin II (CST474CEFG), and the Washlet (S500e / S550e) bidet seats. Our fixture work sits inside the larger bathroom jobs we run, which makes Toto a natural fit when we’re already rebuilding a bathroom, replacing a shower, or setting a new vanity. We don’t publish a stock list, because what’s on hand for a given Santa Rosa home depends on the model and the date.
We Also Service These Brands
Toto is one brand in a much deeper bench. We also work with KraftMaid, Cambria, Silestone and Kohler across our kitchen and bath trades, so a bathroom project that pairs a Toto toilet with a Kohler faucet and a Cambria or Silestone countertop is one coordinated job, not three separate contractors with three separate schedules.
FAQs – Toto Construction Service in Santa Rosa

Is Rowan Construction Group Santa Rosa authorized by Toto? No. We’re an independent Toto service provider, not affiliated with or authorized by Toto. We work from the brand’s public spec sheets, part diagrams and service bulletins to diagnose and remedy Toto-specific failures, and we recommend the right fix based on your model rather than a brand mandate.
Do you use genuine Toto/OEM parts? Yes, we favor genuine OEM Toto fill valves, flappers and gaskets for longevity, and we’ll use quality aftermarket parts on out-of-warranty repairs when budget matters, with the trade-off explained before we order. Call (833) 842-1866 to talk through your model.
How long does Toto service take? Most single-fixture repairs, like a fill valve or flapper, are a same-visit job once the right part is on hand; a Washlet control board or a tank-to-bowl gasket can take a bit longer if a part has to be sourced for your specific model. We’ll tell you the expected timing with the written price.
What Toto models/series do you cover? We cover the lines Santa Rosa owners ask about most: Eco Ultramax (MS854114E), Drake (CST743E / CST776E), Vespin II (CST474CEFG) and the Washlet (S500e / S550e). If you have a different Toto model, tell us which one and we’ll confirm coverage.
Will service void my Toto warranty? Proper service using correct-fit OEM parts generally keeps your Toto warranty intact, and we work in warranty-safe ways on in-warranty fixtures. We’ll flag anything that could affect coverage before we start. Call (833) 842-1866 with your model and purchase date.
How much does Toto construction cost in Santa Rosa? Fixture-level Toto repairs run on the lower end; a Toto toilet or Washlet set into a larger bathroom job is priced with that job. Here are the Santa Rosa ranges:
| Service | Santa Rosa Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (833) 842-1866 for an exact quote; estimates are free.
Book Your Toto Service in Santa Rosa, CA
Whether it’s a running Eco Ultramax, a Washlet that won’t hold power, or a full bathroom remodel built around Toto and Kohler fixtures, we’ll put the price in writing before work starts. Call (833) 842-1866 to schedule your free estimate, or bring a competitor’s written quote and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Santa Rosa.












