A Rowan company - serving Santa Rosa, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Cambria · Santa Rosa

Cambria Construction Service in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A new concrete driveway with a paver border
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Santa Rosa Homeowners Choose Cambria Construction

We provide independent Cambria quartz fabrication, installation, and repair in Santa Rosa, and the difference is in the fabrication bench: seam placement, edge profiling, and finish matching that most quartz installers treat as afterthoughts. Cambria is a quartz surface, not a stone that forgives mistakes, so the details decide whether a countertop looks right in year eight. We’ve installed hundreds of Cambria surfaces across Sonoma County. We are not Cambria-authorized and we don’t claim to be – our expertise comes from field experience, not a dealer badge. Call (833) 842-1866 for a free written estimate.

Call (833) 842-1866

Why Trust Rowan Construction Group Santa Rosa for Your Cambria Construction?

Installers leveling a new base cabinet during a kitchen remodel

Our technicians have up to 19 years of experience, and the Cambria work sits with the people who’ve handled it most. That means knowing that Cambria’s polished edges chip differently than granite’s, that a honed Torquay surface needs different care than a polished Brittanicca, and that the slab’s batch pattern has to be checked against the template before anyone cuts.

On warranty: Cambria’s residential warranty covers manufacturing defects and the finish, not impact damage or thermal shock. We work to keep you inside that line – using Cambria-approved color-matched seam adhesive and edge-protection products because there are no true aftermarket equivalents for color and finish matching. Cutting corners on adhesive shows up in eighteen months as a visible, failing seam. We won’t do it.

Every Cambria job gets a flat written price and written scope before we touch the slab. Under Clause 1 of The Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Free second opinion on any written estimate – bring a competitor’s quote and we’ll read it line by line.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Cambria Construction Problems We Fix in Santa Rosa

  • Edge chipping on polished Cambria edges. A dropped pan, a chair back, a heavy pot – impact on a polished edge like Brittanicca’s can take out a dime-sized chip that exposes the quartz’s inner composition. The fix is edge re-profiling and polishing to match the original finish, not a smear of filler.
  • Thermal shock cracks near cooktops. A hot pan set directly on a dark surface like Cambria Blackwood can crack the slab within minutes; quartz expands and contracts with heat differently than natural stone, and dark colors absorb more. We see this most in kitchens where the range sits flush against the counter with no landing zone.
  • Dulling and staining on honed finishes. Cambria Torquay has a matte, honed surface that shows acidic cleaner damage and improper sealer buildup as a cloudy haze. It looks like the finish is worn; usually it’s a film that needs professional removal, not a reseal.
  • Visible seams and adhesion failure. When a fabricator uses inadequate color-matched epoxy or places a seam in a high-visibility sightline instead of a natural break, the seam shows as a dark line and eventually lifts. Seam placement is a fabrication decision, not a repair.
  • Backsplash adhesion over existing tile. Setting a Cambria backsplash over old ceramic without proper substrate prep leaves voids behind the slab; quartz is heavy and doesn’t flex, so voids telegraph as cracks at the bottom edge within a season or two.

Cambria Parts & Our Repair-vs-Replace Approach

A finished backyard cottage with a small covered porch

Parts for Cambria are not generic. The seam adhesive has to be Cambria-approved and color-matched to the specific series; a generic quartz epoxy will read as a shadow line under kitchen lighting even if the color looks right in the tube. Edge-protection products are Cambria-spec as well. We source parts per job against the exact series and finish – we don’t claim to stock them locally, and we won’t tell you we do.

Repair vs replace is an honest call. Chips and scratches along an edge are usually repairable: remove the damaged section, re-profile and polish to match, apply color-matched epoxy if needed. Large cracks, thermal-shock fractures, or a break that runs across a seam usually mean replacing the affected slab section, matched by batch and pattern. Patching a thermal crack is repeat business for us and a bad outcome for you; we’ll say so. Call (833) 842-1866 for a free assessment.

Our Cambria Service Process – Step by Step

  1. 1
    Diagnosis. We look at the failure mode – chip, thermal crack, seam lift, surface haze – and tell you in plain terms what caused it. A dull Torquay surface is a cleaning-product issue; a crack near the range is thermal; a lifting seam is adhesive. The cause determines the fix.
  2. 2
    Template and slab selection. For new installs and replacements, we template in place, check the slab’s batch pattern against the template, and plan seam placement in a sightline that hides it – not down the middle of an island.
  3. 3
    Fabrication and install. Cambria-approved color-matched seam adhesive, edge profiled to the profile you picked, and edge-protection where the counter meets a high-traffic corner. Under Clause 1, the written price is locked before this step.
  4. 4
    Test and hand-off. We check seams under raking light, confirm the backsplash sits flat against the wall, and leave you a documented photo record of what was found and what was done. Included, not an upgrade.
  5. 5
    Warranty. Written warranty on our workmanship, and the 365-Day Done Right Promise: if it isn’t done right, we make it right – backed by The Haven Standard, not a handshake.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Cambria Products We Service & Install in Santa Rosa

We work across the Cambria line that Santa Rosa kitchens and baths actually use: Cambria Blackwood, Cambria Torquay, Cambria Brittanicca, and Cambria Ella. Blackwood’s dark, dramatic veining suits a statement island; Torquay’s honed, warm-gray surface works well in baths and low-traffic prep zones; Brittanicca’s bold marble-look veining is the most-requested in Santa Rosa kitchens; Ella’s softer movement fits a quieter design. We handle full slab installation, edge profiling, seam work, backsplash fabrication, island fabrication, and chip and crack repair across each. Waterfall edges, undermount sink cutouts, and cooktop cutouts are all part of the fabrication scope.

We Also Service These Brands

Cambria is one brand of many we fabricate and service. We also work with KraftMaid cabinetry, Silestone quartz, and Kohler and Toto fixtures – useful when a Cambria countertop install runs alongside a cabinet replacement or a sink and faucet change. Bringing one contractor to the countertop, the cabinets, and the plumbing rough-in means one written price and one point of accountability, rather than three trades blaming each other.

FAQs – Cambria Construction Service in Santa Rosa

A new roof with clean valleys and new flashing

Cambria Service Typical Range in Santa Rosa
Countertop Installation $2,000 – $6,500
Kitchen Island Installation $3,000 – $10,000
Backsplash Installation $800 – $2,500

Book Your Cambria Service in Santa Rosa, CA

Whether it’s a chip in a Blackwood island edge or a full Brittanicca install, the price is written before anyone starts. Call (833) 842-1866 to schedule a free estimate. Every quote is flat, itemized, and backed by the 365-Day Done Right Promise. Bring a competitor’s quote and we’ll review it line by line at no charge.

Written by the team at Rowan Construction Group Santa Rosa.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch