







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose KraftMaid Construction
Rowan Construction Group Santa Rosa provides independent KraftMaid construction service in Santa Rosa: cabinet installation and refacing, full kitchen remodeling, and quartz or granite countertop work on KraftMaid Vantage, Prelude, and Momentum cabinetry. What makes our KraftMaid work different is that we price the job in writing before anyone picks up a tool, and we tell you whether a failing door front needs a $40 hinge and glide set or a full reface – based on what the boxes actually look like, not on what sells easier. We are an independent KraftMaid service provider, not affiliated with or authorized by the manufacturer, and we say so up front. Call (833) 842-1866 for a free estimate.
Why Trust Rowan Construction Group Santa Rosa for Your KraftMaid Construction?

KraftMaid builds three distinct cabinet families, and they fail in different places. A crew that treats them the same will misdiagnose the job. Vantage and Prelude are framed cabinets – the door hangs on a face frame stile, which is why stripped hinge screws on those two series are a screw-holding problem, not a hinge problem. Momentum is a frameless full-access box, so a door that rubs there is almost always an adjustment or a worn hinge cup, not warped wood. Our technicians have up to 19 years of experience and work on all three.
We source OEM-compatible KraftMaid hinges, drawer glides, shelf clips, and edge-banding for the boxes and doors that are still sound. Where a manufacturer part isn’t the right call, we say which aftermarket equivalent we’re using and why. Every service visit includes a documented photo record of what we found and what we did – the swollen panel, the lifted thermofoil edge, the stripped stile – so you have evidence in hand if a warranty question comes up later. We can’t file a KraftMaid claim for you and we don’t imply any manufacturer endorsement, but we can document condition precisely enough that the conversation is short.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Santa Rosa
Santa Rosa cabinet work has a specific flavor. Bone-dry summers and hot, gusty autumn Diablo winds pull interior humidity down hard, then winter swings it back up – and cabinet joints move with it. Here’s what we actually get called out for on KraftMaid:
- Thermofoil and laminate faces lifting on Vantage and Prelude cabinets. The face delaminates along the stiles and drawer fronts, starting near the range and dishwasher where heat and steam do the most work. Once the edge lifts, moisture gets behind the film and the peel accelerates. It’s a finish failure, not a box failure – which matters for what we recommend next.
- Particleboard and MDF swelling at sink bases, dishwasher flanks, and bottom rails. A slow supply-line weep or years of steam softens the panel, and once the board swells it never returns to thickness. Fasteners stop holding. This is the one KraftMaid problem that can’t be refaced around.
- Hinge screws stripping out of the face-frame stile on framed doors. Doors sag, then rub the adjacent door or the frame. Vantage and Prelude cabinets carry the door load on that stile, so repeated open-close cycles wallow out the screw holes over time.
- Worn or misadjusted full-access hinges on frameless Momentum boxes. Doors drift out of alignment, sit proud of the run, or catch at the bottom corner. Usually adjustment; sometimes a hinge cup that’s given up.
- Drawer glide and roll-out tray wear. Rollers flat-spot, tracks loosen from the box, and drawers start sticking or trays jump the rail – most often in the deep pot drawers that get loaded heaviest.
KraftMaid Parts & Our Repair-vs-Replace Approach

Matching OEM KraftMaid hinges, glides, shelf clips, and touch-up edge-banding is almost always the cheaper and better answer when the boxes and doors are solid. Replacing a hinge pair or a glide set costs a fraction of refacing, and it keeps the original door finish matched across the run – important in an open Santa Rosa kitchen where a color mismatch between one replaced front and eleven originals is instantly visible.
When thermofoil faces are failing across a whole run of doors and drawer fronts, the honest advice is to reface or replace the fronts rather than chase peeling panels one at a time. We don’t stock KraftMaid parts locally; we identify exactly what’s needed during diagnosis and source it for that job, which is why the written quote holds. Call (833) 842-1866 and we’ll tell you which side of that line your cabinets are on – the estimate is free.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every door and drawer, check stile and rail joints, press the thermofoil edges, probe the sink-base and dishwasher-flank panels for softness, and test glide and hinge function across the run. Photographed as we go.
- 2
Written scope and flat price. Before any work starts you get a written scope naming the series, the affected cabinets, and whether we’re replacing hardware, refacing fronts, or replacing a box section – at a flat price, no “call for a quote.”
- 3
Repair or install. Hardware swapped, boxes sistered or replaced, doors and drawer fronts hung and adjusted so reveals run even. No change proceeds without a signed change order.
- 4
Test and photo record. Every door and drawer cycled, alignment checked, countertop scribe and seams confirmed if we’re setting stone. You receive the documented photo record of the finished work.
- 5
Written warranty. Backed by the 365-Day Done Right Promise – if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Santa Rosa
We work on KraftMaid Vantage semi-custom framed cabinetry, including the oak, maple, and thermofoil door options. We work on KraftMaid Prelude framed cabinets in both painted and stained finishes. We work on KraftMaid Momentum frameless full-access boxes. And we service the full-access frameless drawer systems and roll-out trays across those lines – hinge and glide replacement, door and drawer-front refacing, box repair at sink bases and appliance flanks, and new cabinet installation where a full run is being replaced. If you’re pairing new KraftMaid cabinets with stone, we set quartz and granite over them as part of the same written scope.
We Also Service These Brands
KraftMaid is one of more than fifty vetted material brands we work with, and we’re not tied to any single manufacturer. If your kitchen mixes KraftMaid boxes with Cambria or Silestone quartz, or your bath pairs a KraftMaid vanity with Kohler or Toto fixtures, we handle the whole scope under one written price instead of sending you to a second contractor for the countertop or the plumbing trim.
FAQs – KraftMaid Construction Service in Santa Rosa

Yes – if the boxes, shelves, and glides are solid, we reface the doors and drawer fronts and keep the existing cabinet bodies. Refacing makes sense when the failure is thermofoil lifting or finish wear on the fronts; it doesn’t make sense when sink-base or dishwasher-flank panels have swollen and softened, because there’s nothing sound left to attach new fronts to. Call (833) 842-1866 for a free estimate and we’ll tell you which case you’re in.
That depends on the age of the cabinetry and the terms of your specific KraftMaid warranty, and we can’t make that call for you. What we can do is document the failure precisely – where the thermofoil has lifted, how far, and whether it’s isolated or running the length of the stiles – with a photo record you can submit. Many peeling cases fall outside the coverage window and get solved by refacing the affected fronts instead.
The screw holes in the face-frame stile have wallowed out. The durable fix is to fill and re-drill the stile, or move to a slightly larger-gauge screw, then re-hang and re-adjust the door; a hinge swap alone won’t hold if the wood itself has lost grip. We diagnose the stile, not just the hinge, before quoting. Call (833) 842-1866 for a free estimate.
Usually not as-is. Once particleboard or MDF swells from a slow leak or years of steam, it doesn’t return to thickness and won’t hold fasteners reliably. The standard fix is replacing that cabinet box section and re-hanging the original doors and drawer fronts, which keeps your finish matched. We find and address the leak source first – otherwise the new base goes the same way. Call (833) 842-1866 to get it looked at.
Yes, provided the cabinet boxes are level, square, and structurally sound – stone needs a flat, rigid substrate underneath it. Swollen sink bases and loose boxes get repaired before the template, not after. We set quartz and granite over KraftMaid frames regularly, and the countertop scope is quoted in the same written price as any cabinet work.
Here are the ranges we quote in Santa Rosa, in writing, before work starts:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Refacing a run of KraftMaid fronts sits below a full remodel; replacing a swollen box section sits in the middle. The price you get is flat, with a written scope and a written warranty. Call (833) 842-1866 for an exact quote – estimates are free.
Book Your KraftMaid Service in Santa Rosa, CA
Whether it’s a peeling Vantage door front, a Momentum hinge that won’t stay adjusted, or a sink base that’s gone soft, we’ll diagnose it, price it in writing, and tell you honestly whether it’s a hardware fix or a reface. Calls are answered by a live person, and every visit comes with a documented photo record. Call Rowan Construction Group Santa Rosa at (833) 842-1866 for your free estimate.
Written by the team at Rowan Construction Group.












