







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Santa Rosa?
Walk-in shower installation in Santa Rosa typically costs $4,500 to $12,000 for a full project, from tear-out of the old enclosure to a finished, waterproofed tile shower with a new drain, valve and glass. A straightforward swap in an existing alcove with a pre-made pan and acrylic walls usually lands near the low end, around $4,500 to $6,500. Custom tile work, a curbless entry, a linear drain or a frameless glass panel pushes the number toward $9,000 to $12,000.
Those ranges cover labor and materials for a complete job: demolition, rough plumbing adjustments, waterproofing, tile or panel walls, the shower valve and trim, the drain, and glass. They assume a standard-sized shower in a single-family home. A structural change, a move to a new wall, or a bathroom that turns out to hide water damage adds to the written price, and we tell you the number before anyone picks up a tool.

Key Takeaways
- Full walk-in shower installation in Santa Rosa runs $4,500 to $12,000.
- Tile and custom pans sit at the high end; acrylic and pre-made pans sit low.
- Waterproofing – the membrane behind the tile – is where cheap jobs fail. We name the product on the quote.
- Santa Rosa’s older housing stock, especially pre-1980 homes, often hides rot and galvanized plumbing behind the old shower wall.
- Every Rowan project gets a flat written price, a written scope and the 365-Day Done Right Promise before work starts.
Walk-In Shower Installation Cost Breakdown (2026)
Here’s how the money breaks down on a typical Santa Rosa walk-in shower. These are the line items we put in writing, with the dollar ranges our crews see on jobs across Sonoma County.
| Line Item | Typical Price Range |
|---|---|
| Demolition and haul-away of old shower/tub | $400 – $900 |
| Rough plumbing (valve, drain, supply adjustments) | $600 – $1,800 |
| Waterproofing membrane and pan (e.g. Schluter Kerdi, Wedi) | $800 – $2,200 |
| Shower pan / base (pre-made acrylic or tiled) | $400 – $1,500 |
| Wall tile or acrylic surround (material + labor) | $1,200 – $3,800 |
| Shower valve and trim (e.g. Kohler, Moen, Delta) | $300 – $1,200 |
| Glass enclosure and door (framed or frameless) | $700 – $2,500 |
| Permit and inspection (if required) | $150 – $500 |
| Total installed | $4,500 – $12,000 |
What pushes a job up or down? Two things dominate. First, the wall finish: a tiled shower with a proper waterproofing membrane behind it costs more than an acrylic panel kit, but it’s also what holds up in a wet climate. Second, the plumbing condition once we open the wall. In a 1950s Santa Rosa ranch home, we sometimes find galvanized supply lines or a drain that’s been patched twice, and that changes the scope. On the downside, keeping the existing drain location and valve body – when they’re sound – is the single biggest way to keep a walk-in shower near $4,500.

What Affects Walk-In Shower Installation Pricing in Santa Rosa
- Wall finish and waterproofing. A bonded waterproofing membrane (Schluter Kerdi and Wedi are the two we specify most) with porcelain tile runs more than an acrylic surround, but it’s the difference between a shower that lasts and one that grows mold behind the wall in five years. We name the membrane and the tile on every quote so you can compare apples to apples.
- Curbless versus curbed entry. A curbless (zero-threshold) shower needs the floor framing recessed or a linear drain added to handle the slope. That’s a $1,500 to $3,000 jump over a standard curbed pan, and it’s worth it for aging-in-place or a cleaner look.
- Age and plumbing of the home. Santa Rosa has a lot of homes built between 1940 and 1980, and behind the old tile we regularly find rot at the curb, a copper or galvanized drain that’s failed, or a shower valve that’s frozen. We photograph what we find and add only what the signed change order covers.
- Glass type. Standard framed glass is the budget choice. A frameless 3/8-inch tempered panel with a pivot door adds $1,000 to $2,000 but opens up a small Santa Rosa bathroom visually.
- Tile choice. Large-format porcelain (24×48) means fewer grout lines and less labor on setting but more on cutting and leveling. A mosaic shower floor costs more in labor than a slab-format pan.
- Permits. A shower that relocates the drain or valve usually triggers a plumbing permit. Santa Rosa building permits and inspection add a modest line item, and we build it into the written price, not the surprise column.
How to Save on Walk-In Shower Installation
You can keep a walk-in shower in Santa Rosa closer to $4,500 without cutting the parts that matter. Here’s where to look:
- Keep the drain and valve where they are. Moving them means new plumbing rough-in and a permit line. If they’re sound, leave them.
- Choose a pre-made pan with tile walls. You get a waterproof, tiled look on the walls and an acrylic base you’ll never reseal, saving $1,000 or more versus a fully tiled pan.
- Go standard on glass. A framed enclosure with a clean profile looks sharp and costs roughly half of frameless 3/8-inch glass.
- Bundle it with the bathroom. A walk-in shower is often part of a full bathroom remodel, and doing the vanity and floor at the same time spreads the setup cost across one permit and one crew schedule.
- Get a free second opinion. We review any written estimate line by line at no charge. Bring a competitor’s quote and we’ll show you what’s missing from it – the waterproofing spec, the glass thickness, the plumbing allowance – before you sign.
Every price we give is written, flat, and delivered before work starts. Call (833) 842-1866 for a free estimate and a number you can hold in your hand.
Frequently Asked Questions
Is it cheaper to repair or replace a walk-in shower in Santa Rosa?
It’s usually cheaper to repair a walk-in shower if the pan and waterproofing are intact – resealing, regrouting or replacing a valve runs $300 to $1,500. Once the shower pan or the membrane behind the tile has failed, replacement is the honest number: a full walk-in shower install is $4,500 to $12,000, and patching a failed pan buys you a year or two before it leaks again. We look at the shower with you and tell you which case you’re in. Call (833) 842-1866 for a free assessment.
How long does walk-in shower installation take in Santa Rosa?
A standard walk-in shower takes about 2 to 4 working days: one for demolition and plumbing, one to two for waterproofing and tile, and one for glass and trim. A tiled pan or curbless shower adds a day for the slope and the dry time on the membrane. We schedule the glass templating around the tile and put the timeline on the written scope so you know when your Santa Rosa bathroom is back in service.
Do I need a permit for a walk-in shower in Santa Rosa?
You typically need a permit if the project moves the drain or valve, changes the venting, or alters the wall structure. A like-for-like replacement that keeps the plumbing in place often doesn’t. Santa Rosa permit fees add roughly $150 to $500, and we include the permit on the written price when it’s required so there’s no separate bill later.
What’s the difference between a walk-in shower and a tub-to-shower conversion?
A walk-in shower install is the shower itself; a tub-to-shower conversion removes an existing tub and rebuilds the space as a shower. A conversion runs $3,500 to $10,000, and it’s the more common job in Santa Rosa homes where the second bathroom still has a 1970s alcove tub. It shares the same waterproofing, tile and plumbing scope, so the number comes down to the shower finish you choose. Call (833) 842-1866 to price both.
Can Rowan come out this week for a shower estimate in Santa Rosa?
Yes. We answer the phone with a live person, background-checked and uniformed technicians handle the visit, and every estimate includes a documented photo record of what we found and a flat written price. A free second opinion on any written block you already have is standard. We serve the whole Santa Rosa service area and the surrounding Sonoma County towns, and we’ll give you the number in writing before anything is ordered. Call (833) 842-1866 to get on the schedule.
What Our Process Looks Like From Quote to Finished Shower
When we quote a walk-in shower in Santa Rosa, you get a written scope, a flat price, and a written warranty – not a “call for a quote.” Under Clause 1 of the Haven Standard, that price is locked before the first tile is pulled. If we open a wall and find rot or a failed drain, we stop, we photograph it, and we write a change order for the extra. No work proceeds on that change until you’ve signed it. That discipline is why our projects finish within a few percent of the agreed number, on 4,000-plus jobs.
Every visit includes a photo record as a deliverable, not an upgrade. You’ll see the condition of the substrate, the waterproofing membrane before tile, and the finished glass – documented so you have evidence of what was found and what was done. Our technicians bring up to 19 years of experience, and crews are background-checked and uniformed before they arrive. When something isn’t right, the 365-Day Done Right Promise means we make it right, backed by our written terms, not a handshake.
If you’re comparing a walk-in shower against a smaller project, our pricing guides for shower replacement and small bathroom remodel lay out the line items the same way. If the shower is part of a bigger refresh, the bathroom remodel service page ties the trades together, and our vanity installation and countertop installation pages cover the finish work that usually goes alongside it.
Areas We Serve Around Santa Rosa
Walk-in shower installation across Santa Rosa covers neighborhoods from Rincon Valley and Bennett Valley to the Junior College area and Coffey Park, plus nearby towns. If you’re in a neighboring city, our Rohnert Park, Petaluma and Windsor service pages cover the same written-price process, and our Sebastopol and Healdsburg pages handle the west and north county. Roberts Lake and Larkfield homeowners get the same crew and the same flat quote. Start from the home page if you want the full picture of the seven trades we run, or call (833) 842-1866 and we’ll get a written number to you within a day.
Get Your Walk-In Shower Priced in Writing
If you’re ready for a real number – not a range someone ballparked over the phone – call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate. You’ll get a written scope, a flat price, the materials named brand by brand, and the 365-Day Done Right Promise before any work begins. Bring a competitor’s quote if you have one; we’ll review it line by line at no charge. The price is written before anyone picks up a tool. That’s the whole point.
Pricing reflects the Santa Rosa market as of 2026. Rowan Construction Group Santa Rosa offers free estimates – call (833) 842-1866.
What Our Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R.












