







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Santa Rosa, CA
A tub-to-shower conversion in Santa Rosa typically costs $6,500 to $14,500 for a full replacement – demolition, new waterproofing, tile, drain relocation, and a code-compliant shower pan – and most jobs are completed in 5 to 10 working days. It’s the single most requested change we quote in Sonoma County bathrooms, and for good reason: a shower uses far less water than a tub, takes up less floor space, and gives a 1950s or 1970s hall bath the footprint it was always missing.
We do this work as part of Bathroom Remodeling – it’s one of seven trades Rowan Construction Group Santa Rosa runs, and it’s the trade where the substrate behind the wall matters more than the tile in front of it. Our technicians have up to 19 years of experience, the price is written before any demo starts, and you get a documented photo record of what was behind the old tub so there are no surprises after the fact. Call (833) 842-1866 for a free written estimate.
Key Takeaways
- Typical Santa Rosa range: $6,500 to $14,500 depending on tile, pan type, and whether plumbing moves.
- Most conversions run 5 to 10 working days on site.
- The written price comes before demo, not after.
- Every visit includes a photo record of the exposed framing and plumbing.
- 365-Day Done Right Promise on the finished install.

When You Need Tub-to-Shower Conversion
Most calls we get in Santa Rosa aren’t luxury decisions – they’re driven by one of these:
- The tub is failing at the drain or overflow. In older Santa Rosa housing stock, especially the 1940s-1970s homes near Cherry Street and the West End, we regularly see cast-iron tubs with rust pitting at the drain and overflow that leaks slowly into the subfloor for years before anyone notices. A shower pan with a bonded waterproof membrane solves the problem at the source.
- Someone in the house can no longer step over a tub wall. A curbless or low-curb shower with a linear drain and a properly sloped pan is the practical fix. We frame the floor down and waterproof it with a Schluter system so the transition is level, not a trip hazard.
- You only ever use the shower anyway. If the tub has become a place to store towels, the floor area it’s eating is worth reclaiming – most conversions gain 2 to 4 square feet of usable floor, which in a small hall bath is the difference between cramped and workable.
- The tile and surround are dated or cracked. Cultured marble from the 1980s, cracked grout lines, or a surround that’s pulling away from the wall. Once the wall is open we inspect the framing and the plumbing rough-in before anything goes back up.
- You’re preparing to sell or rent. Buyers in Sonoma County consistently value a clean, modern shower over a tired tub, and a conversion with documented work is far easier to list than a “needs updating” bathroom.
- Water damage you can see. Soft spots in the floor, a loose tile, or a discolored ceiling below the bathroom. If water has been getting behind the tub wall for a while, the membrane and substrate need to be replaced, not patched.
If any of these sound familiar, a conversion is usually the more honest fix than trying to re-caulk or re-glaze around a failing tub. Call (833) 842-1866 and we’ll tell you what we can see from the outside before anyone touches a tool.
Our Tub-to-Shower Conversion Process
Every conversion follows the same sequence. Nothing skips ahead to tile.
- Written scope and flat price. We measure the existing tub, note the drain and overflow locations, confirm what’s behind the wall as far as we can without opening it, and deliver a written price and written scope before demo. Under Clause 1 of The Haven Standard, the price is written before anyone starts.
- Demo and inspection. The old tub, surround, and any failing substrate come out. We photograph the exposed framing, the plumbing rough-in, and the subfloor, and we show you what we found. If something changes the scope (rotten framing, an offset drain, old galvanized supply lines), we don’t proceed – the change order is signed first.
- Rough-in and waterproofing. The drain is relocated to the new shower position, the pan is built or set, and the walls are waterproofed with a bonded membrane. We use Schluter systems on most Santa Rosa conversions because the Kerdi membrane bonds directly to the substrate and the seams are taped and thinset – a continuous waterproof layer rather than a paint-on coating that can fail at the corners.
- Tile and fixtures. Tile goes in over the cured membrane. We typically set a linear or center drain and install the trim – a Grohe or Toto shower valve and head, or a Sterling surround if you prefer an acrylic wall to tile. Brands are named in the written quote, not swapped later.
- Finish, glass, and walkthrough. Glass panel or door, caulk at the perimeter (not the pan interior), and a full water test. We leave you with the photo record, the signed change orders (if any), and the written warranty.
The 365-Day Done Right Promise covers the install for a full year – if something isn’t right, we make it right. The written warranty is part of the package, not a footnote.

Tub-to-Shower Conversion Pricing in Santa Rosa
Here’s what a conversion actually costs in Santa Rosa, in dollars you can screenshot and compare. These are ranges, not quotes – the written flat price comes after we’ve seen the space.
| Line item | Typical range |
|---|---|
| Demo, haul-away, disposal | $450 – $900 |
| Drain relocation and rough-in | $600 – $1,800 |
| Shower pan and waterproofing (Schluter or equivalent) | $1,200 – $2,600 |
| Tile and wall finish | $1,500 – $4,500 |
| Valve, trim, and showerhead (Grohe / Toto) | $400 – $1,200 |
| Glass panel or door | $600 – $1,800 |
| Acrylic surround alternative (Sterling) | $1,800 – $3,200 (combined with pan) |
| Permit and inspection | varies by scope – confirmed in writing |
| Total typical conversion | $6,500 – $14,500 |
What pushes a Santa Rosa conversion to the higher end: relocating the drain more than a few feet, converting a cast-iron drain to PVC, discovering rotten framing behind the tub wall (common in homes with 30+ years of moisture exposure), or choosing large-format or natural stone tile that takes longer to set. What keeps it lower: keeping the drain in place, using an acrylic surround, and a standard center-drain pan.
The price is written before any work starts. If a change is needed mid-job, a change order gets signed before the crew proceeds – that’s the discipline that has kept our projects within a few percent of the agreed cost across more than 4,000 jobs. Bring a competitor’s written quote and we’ll review it line by line at no charge. Free second opinion, every time. Call (833) 842-1866 for a free estimate.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Santa Rosa?
A tub-to-shower conversion in Santa Rosa typically costs $6,500 to $14,500, with most jobs landing in the $8,000 to $11,000 range when you keep the drain in its current position and use standard tile. Call (833) 842-1866 for an exact written quote – estimates are free.
Can you do a tub-to-shower conversion in a single day?
No – a one-day conversion means an acrylic liner over the existing walls, which is a different product than a full replacement. A proper conversion that opens the wall, relocates or resets the drain, waterproofs with a bonded membrane, and tiles takes 5 to 10 working days on site, and we think that’s worth being honest about. Call us to schedule a walkthrough and a written timeline.
Is it cheaper to repair or replace a failing tub?
Replacement is almost always the better value once the tub has failed at the drain or overflow. Reglazing costs $400 to $700 and typically lasts 3 to 5 years before it peels again; a conversion solves the underlying waterproofing problem instead of painting over it. Call (833) 842-1866 and we’ll tell you honestly which one your bathroom needs.
Do I need a permit for a tub-to-shower conversion in Santa Rosa?
Usually, yes – relocating a drain, changing plumbing, or altering the shower pan generally triggers a plumbing permit and inspection in Sonoma County. We confirm the permit requirement in writing in your scope so there’s no ambiguity. Call us and we’ll walk you through what your specific project will need.
Can you convert a tub to a curbless shower for aging-in-place?
Yes – a curbless, low-threshold shower with a linear drain is one of the most common reasons we get called for conversions in Santa Rosa. We frame the floor down, waterproof it with a bonded membrane system, and install grab bar backing in the walls even if grab bars come later. Call (833) 842-1866 to talk through the layout.
What happens if you find water damage behind the tub wall?
We photograph it and show you before anything else happens. If the damage requires a change in scope – new framing, a new drain line, mold remediation – a change order is written and signed before work proceeds. No surprises after demo. Call us for a free second opinion on any written estimate.
If you’re ready to see what a conversion actually costs for your Santa Rosa bathroom, call (833) 842-1866 for a free written estimate. The price is in writing before anyone picks up a tool, the documentation comes with the work, and the 365-Day Done Right Promise backs it up. You can also start with our Bathroom Remodeling in Santa Rosa overview to see how a conversion fits into a larger bath project.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa.


