







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Bathroom Remodeling: The Santa Rosa Owner’s Guide
Boxabl-compatible bathroom remodeling in Santa Rosa runs $9,000 – $28,000 installed for a full bathroom, with a smaller bathroom landing at $5,000 – $12,000 and a walk-in shower replacement at $4,500 – $12,000. Rowan Construction Group Santa Rosa is an independent service provider, not affiliated with Boxabl, and every job starts with a flat written price and written scope before anyone touches the unit. Most owners discover a bathroom problem the same way: a soft spot at the base of the shower pan, a tub that flexes when they step in, laminate flooring that has started to lift at the seams near the toilet, or a vanity cabinet that no longer closes flush because the substrate behind it has swollen. It’s rarely the finish that fails first. It’s what’s underneath it.
Which Boxabl Models This Applies To
Boxabl’s bathroom assembly lives in the same structural chassis as the rest of the unit, which is the reason you can’t treat a bathroom remodel in a Boxabl the way you’d treat one in a stick-built house. The Casita line ships as a factory-finished unit with a pre-installed wet bath, and later production runs changed fastening patterns and substrate choices, so a part that fits a 2021 unit may not seat correctly in a 2024 model. Before ordering anything, find the builder’s plate inside the unit – it carries the production series and date. Measure the existing pan, the apron height, and the flange depth at the wall; a boxed replacement sold as “fits Boxabl” that’s actually for a different production run will be off by half an inch, which is enough to break the waterproof seal. For the OEM-versus-aftermarket call: OEM gives you a guaranteed fit but a longer lead time and a premium price, while a quality aftermarket equivalent – a standard-size Kohler or Toto fixture that matches the rough-in dimensions – usually installs faster and costs less, provided the rough-in is verified first. Vanities we source on the same principle, at the $800 – $3,000 vanity range, with KraftMaid and Cambria among the brands we work with when an owner wants the finish to move up from the factory standard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Bathroom Remodeling Is Failing
Here’s what typically shows up in a Santa Rosa unit, and what’s actually going on underneath it:
- Flex or give underfoot in the shower pan. The drain fitting has lost its seal or the pan substrate has cracked, letting moisture into the cavity below. Flex is the early warning; a water stain on the ceiling beneath is the late one.
- Caulk that reopens within weeks of being redone. Sealant that keeps failing is usually trying to bridge a gap that’s still moving. That points to movement in the pan or wall assembly, not bad caulk.
- Lifted flooring at the toilet base or along the shower threshold. Water is wicking out from a failed seal, and the subfloor or underlayment is absorbing it. This is the most common failure mode we see in Santa Rosa, and it gets expensive fast if let go.
- Vanity doors that hang unevenly or won’t latch. The cabinet is fine; the wall behind it has swelled. That’s a moisture problem, and it means the membrane behind the finishes has been compromised.
- A persistent musty smell that returns after cleaning. The smell lives inside the drain trap or the wall cavity, not the surfaces you can reach. Treat it as an active moisture problem until proven otherwise.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing for this work is straightforward, and we put it in writing before any work starts:
| Job | Santa Rosa installed range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
What drives the range: the condition of the substrate once the old finish comes out, whether the membrane needs a full replacement or a patch, and whether you’re moving up from factory-standard fixtures to a brand like Kohler or Toto. Parts-plus-labor is quoted as one flat number with the itemized scope attached – you see the line items, you approve the number. No change proceeds without a signed change order, which is why Rowan projects finish within a few percent of the agreed cost. Every job carries the 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by The Haven Standard and a written terms page, not a handshake. Every visit includes a photo record as a standard deliverable, so you have evidence of what was found and what was done before the crew leaves.
DIY or Call Us?
An owner can safely do three things: check for soft spots in the floor around the toilet and shower, look for dark staining or lifted tile at the base of the pan, and sniff for mustiness after the room has been closed up. Anything past that – pulling the shower pan, opening the wall to inspect the membrane, resetting the drain fitting – is where it goes wrong. On a Boxabl, the bathroom sits inside a structural chassis, and the waterproofing layers are stacked in the order the factory put them there. Getting that order wrong means water goes under the finished floor and stays there, and by the time you notice it’s a full substrate replacement instead of a fitting-to-fitting swap. Call (833) 842-1866 for a free estimate, and bring any written estimate you’ve already been given – our free second opinion walks it line by line at no charge.
FAQs

Ten to fifteen years is typical, and Santa Rosa’s climate is the reason – wet winters punctuated by dry, hot summers puts the membrane and sealant through more expansion and contraction in a year than the fixtures themselves see in a decade. Keep the vent fan running longer than feels necessary during and after showers, and expect the caulk lines around the pan to go first. Call (833) 842-1866 for an exact quote on your unit – estimates are free.
Sometimes. If the substrate is intact and the drain seal is sound, a reseal at the pan and threshold gets you years more out of the assembly at a fraction of the replacement number. Once the flooring has lifted or the wall has swelled, patching is a temporary fix and we’ll say so. Our free second opinion reviews the scope line by line and tells you plainly which side of that line you’re on.
A shower replacement typically runs one to three working days once the part is on site; a full bathroom remodel runs longer, and we give you the schedule in the written scope before the first day on site. We don’t promise same-day completion, because these are planned installs, not emergencies. You get a written schedule and a written price before anyone picks up a tool – call (833) 842-1866 for a free estimate.
We verify your production series from the builder’s plate, confirm the rough-in dimensions and flange depth, and then quote both an OEM path and a verified aftermarket equivalent – a standard Kohler or Toto fixture sized to fit, for example – so you can compare the numbers. We don’t claim to keep Boxabl parts on hand; we source and confirm fit before the install is scheduled. If you’re considering a finish upgrade to a Cambria or Silestone top on the vanity while the work is open, that’s confirmed at the same stage. Call (833) 842-1866 for a free estimate on your Santa Rosa unit.
If your Santa Rosa Boxabl bathroom has a soft floor, a flexing pan, or a musty smell that keeps coming back, call (833) 842-1866 to schedule your free estimate. We’ll confirm the fit, put the price in writing before any work starts, and show you the photo record of what we found – that’s the whole process, on every trade from Bathroom Remodeling through Home Additions and ADUs.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












