A Rowan company - serving Santa Rosa, CA
A home with a brand-new roof and gutters at golden hour
Dvele · Santa Rosa

Dvele Roofing in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A newly finished roof with a ridge vent and step flashing
A standing-seam metal roof over a covered porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A new bay window with a cushioned seat
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Roofing: The Santa Rosa Owner’s Guide

We install Dvele-compatible roofing in Santa Rosa, and most full roof replacements here land between $8,000 and $20,000 installed, with targeted repairs running $400 to $1,800. Metal systems, which Dvele’s modular panels are built to accept, sit in the $15,000 to $40,000 range. We are an independent contractor and are not affiliated with Dvele. We quote a flat written price before any work begins.

Call (833) 842-1866

Owners usually discover a roofing problem the same way: a water stain spreading across a ceiling in January, granules collecting in a downspout, or a flashing detail that a roofer flags during an unrelated inspection. Santa Rosa’s wet winters and dry, hot summers put Dvele roof assemblies through real thermal cycling, and the seams and penetrations are where that stress shows first.

Which Dvele Models This Applies To

A new clay tile roof

Dvele builds modular homes across several model lines, and the roof assembly differs by series. Some lines ship with a factory-installed standing-seam metal roof; others arrive roof-ready with a structural deck for a field-applied shingle or membrane system. That distinction decides which parts apply to you, so identify your model before ordering anything.

  • Model plate: Look on the electrical panel door or inside a utility closet for the home’s model and serial label. Dvele tags its modules, and that tag names the series.
  • Roof type check: From the ground, standing-seam metal shows long vertical ribs; a shingle roof shows overlapping tabs. Note which one you have.
  • Penetration measurements: Measure the vent stacks, skylight curbs, and boot collars. Dvele uses standard nominal pipe sizes, but the curb heights on skylights vary by model.

The OEM-versus-aftermarket call matters here. Dvele’s factory metal panels are proprietary in profile, so replacing a damaged panel usually means a matching-order or a localized patch rather than a shelf part. Shingle decks and standard flashings are far more forgiving; a quality aftermarket boot, pipe collar, or ridge vent that meets the same spec works fine and costs less. We confirm compatibility against your model tag before quoting.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Roofing Is Failing

Five symptoms we see on Dvele homes in Santa Rosa, and what each one actually means:

  • Granules in the gutter. Shingle surfaces shed grit as they age, and heavy accumulation points to a mat that’s near the end of its life. In our climate that often means the south- and west-facing slopes go first.
  • Ceiling stains after rain. Water on a ceiling usually traces to a flashing or penetration failure, not the field of the roof. The pipe boot and skylight curb are the first places to inspect.
  • Lifted or curling shingle edges. Thermal cycling between wet winters and hot dry summers works the adhesive strips loose. Curling edges let wind-driven rain underneath.
  • Loose or dented metal panels. Fasteners back out and panels oil-can over time; a lifted seam is an entry point for water. Check the panel laps and ridge cap after a windy storm.
  • Daylight or dampness in the attic. Visible light through the deck means a breach above it. Damp sheathing or insulation points to a slow leak that’s been running for a while.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Here are the installed ranges we quote in Santa Rosa, parts and labor together:

  • Roof repair: $400 – $1,800. Covers flashing, boot, and localized shingle or panel work.
  • Roof replacement: $8,000 – $20,000. Depends on square footage, layer count, and deck condition.
  • Metal roof installation: $15,000 – $40,000. Driven by panel profile, gauge, and the complexity of your Dvele roofline.

What drives the range: the number of existing layers to tear off, whether the sheathing is sound or needs replacement, how many penetrations and valleys the roof has, and whether we’re matching a proprietary Dvele panel or using a standard system. Every quote is a flat written price with a written scope and warranty, so the parts and labor breakdown is on the page before anyone climbs a ladder. No change proceeds without a signed change order. Under Clause 1 of the Haven Standard, the price is written before any work starts.

DIY or Call Us?

Roof work is height work, and that alone is the honest dividing line. From the ground with binoculars, you can safely check for granule loss, lifted panels, and obvious flashing gaps, and you can look in the attic for daylight or damp sheathing. That’s the limit of what we’d recommend.

Where DIY goes wrong on a Dvele roof: matching a proprietary metal panel profile, resealing a skylight curb so it doesn’t leak again by the next storm, and getting the underlayment right at the seams, which is where most re-leaks start. A ladder, a steep pitch, and a wet Santa Rosa winter are a bad combination for anyone without fall protection. We’d rather you call than take that risk. Reach us at (833) 842-1866 and we’ll schedule a free estimate.

FAQs

An open kitchen and dining area after a remodel

How long does a Dvele roof last in Santa Rosa? A factory metal roof on a Dvele home typically runs 40 to 70 years with proper fasteners and finish maintenance, while a shingle deck lasts around 20 to 30 years in our climate. Santa Rosa’s wet winters and hot dry summers speed up wear on any roof, so inspect annually. Call (833) 842-1866 for a free assessment.

Can a failing part be repaired instead of replaced? Often, yes. A leaking pipe boot, a lifted flashing, or a few damaged shingles can usually be repaired for $400 to $1,800 rather than replacing the whole roof. We inspect first and quote repair when repair is the right call. Call (833) 842-1866 for an exact price.

How long does a replacement take? A localized repair is usually a few hours, while a full roof replacement on a typical Dvele home takes a few days depending on size and weather. We give you the timeline in writing with the quote. Call (833) 842-1866 to schedule.

How do you source the right part for my Dvele model? We start from your model and serial tag, confirm the roof type and penetration sizes, then match a Dvele-compatible or spec-equivalent part. We don’t claim to stock parts, so we source to your model and quote the flat price once we’ve confirmed fit. Call (833) 842-1866 to get started.

We also handle KraftMaid, Cambria, and Silestone projects across the rest of the home. Call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate and a written price before any work starts.

Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeA new casement window over a kitchen sinkA new white vinyl privacy fence with a double gateNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted walls

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch