A Rowan company - serving Santa Rosa, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Tremron · Santa Rosa

Tremron Kitchen Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A new paver pool deck
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Kitchen Remodeling: The Santa Rosa Owner’s Guide

Tremron-compatible kitchen remodeling in Santa Rosa typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and how much the project touches plumbing and electrical. The “part” most owners land here looking for is usually a Tremron surface product in a failing kitchen finish program – a paver-format backsplash, a Tremron-spec countertop edge, or a decorative tile field that has loosened from its substrate. We source and install these as part of full kitchen remodels, not as isolated replacement pieces, because the failure almost always traces back to what’s under the surface.

Call (833) 842-1866

Owners usually discover the problem the same way: a hollow sound under a fingertip on the backsplash, a grout line that has opened at the seam where the counter meets the wall, or a tile that lifts clean off the substrate after a hot week. Santa Rosa’s inland heat cycling – 100°F afternoons in summer, cool fog-fed mornings the rest of the year – is hard on thin-set and mastic bonds that weren’t specified for the swing.

Which Tremron Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Tremron is best known for its paver and hardscape lines – Olde Towne, Sierra, Kingston, and the Tremron Casa series among them – so when a homeowner tells us they have “Tremron” in the kitchen, they usually mean a Tremron-format paver or brick-veneer product repurposed as a decorative backsplash, a hearth surround, or a floor inlay. Tremron also produces a line of modular brick-shaped wall products that installers adapt for interior accent walls.

Identifying the exact product starts with the box or carton the material arrived in, if the homeowner still has it. Failing that, measure the unit: Tremron pavers commonly run in 4×8-inch and 6×9-inch formats, with nominal thicknesses around 2⅜ inches for standard pavers. That thickness matters because a product sized for exterior hardscape needs a different substrate and adhesive than a standard ⅜-inch interior tile.

The OEM-versus-aftermarket decision is simpler here than on mechanical parts. Tremron doesn’t sell “kitchen parts” the way a faucet brand sells cartridges – the product is the material. What you’re matching is the format, the color lot, and the surface texture. Color lots change between production runs, which is why we always recommend confirming a current sample against the installed field before ordering. Rowan Construction Group Santa Rosa is an independent contractor and is not affiliated with Tremron; we source Tremron product through vetted distributors alongside KraftMaid, Cambria, and Silestone for the rest of the kitchen scope.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Kitchen Remodeling Is Failing

  • Hollow or drummy sound when tapped. This means the bond between the paver-format unit and the substrate has broken, usually because the original installer used a mastic not rated for the unit’s weight and the substrate’s movement.
  • Grout lines opening at inside corners. A widening gap at the counter-to-wall seam signals differential movement – the cabinet run and the wall are shifting at different rates, and a rigid grout can’t absorb it.
  • Efflorescence or white powdery bloom on the surface. Moisture is moving through the unit from behind, which points to a missing or failed waterproofing membrane rather than a surface problem.
  • Edge spalling or chipping on a countertop format. Repeated impact at a high-traffic edge plus a brittle surface layer can chip; the fix is a new edge profile, not a spot patch.
  • Loose units that lift clean off the substrate. When a paver-format piece comes off with no thin-set stuck to its back, the adhesive never bonded – often a dust-contaminated substrate or an unprimed surface.

Replacement Cost & What’s Included

A remodeled family room with new windows and a window seat

Here are the installed ranges we quote for the Santa Rosa market. These are flat written prices with a written scope, not estimates that drift once the crew is on site.

Scope Installed Range
Full kitchen remodel (Tremron surface + full scope) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Backsplash installation (Tremron-format field) $800 – $2,500
Countertop installation $2,000 – $6,500
Cabinet installation $4,000 – $13,000
Kitchen island installation $3,000 – $10,000

The range is driven by substrate repair (removing and replacing failed backer board or membrane), the color-lot match, and whether plumbing or electrical needs to move. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely check a few things: tap the surface to map hollow spots, confirm the unit dimensions with a tape measure, and inspect for moisture staining at the base of the wall. What goes wrong in DIY is the substrate and the bond. Setting a Tremron-format paver on a kitchen wall is not the same as setting a thin ceramic tile – the weight and thickness demand a specific thin-set, a flat substrate, and often a mechanical key. A failed bond at counter height can mean a unit dropping onto a stone counter or a gas range below, and that’s a genuine safety issue, not a cosmetic one. If the substrate is wet or the membrane is gone, a surface re-set just fails again in a year.

Call (833) 842-1866 to schedule a free estimate and a free second opinion on any written quote you already have.

FAQs

A standing-seam metal roof over a covered porch

Get a Written Price on Your Santa Rosa Kitchen

If your Tremron-format kitchen surface is failing, the first step is a written scope that names the part, the substrate repair, and the flat price – before anyone picks up a tool. Rowan Construction Group Santa Rosa delivers a flat written price with a written scope and a 365-Day Done Right Promise on the work, plus a documented photo record on every visit so you have evidence of what was found and what was done. Call (833) 842-1866 for a free estimate, or bring a competitor’s quote for a free second opinion – we’ll review it line by line at no charge.

Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA new curved paver walkway to the front porchA walk-in shower with large-format tile and a built-in niche

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch