







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Santa Rosa Owner’s Guide
Tremron pavers are the dominant hardscape brand on Santa Rosa driveways and patios, and replacing or re-laying a failed section typically runs $7,000 – $18,000 installed for a full paver driveway, with smaller repair sections priced far lower. We install Tremron-compatible systems across Santa Rosa, and if you’ve got a failed section, the sooner we look at the substrate the cheaper the fix.
Owners usually discover the problem the same way. A paver lifts at the edge of the driveway where the tire turns. Sand washes out from the joints after the first big rain and the field starts shifting. Or a patio corner near a downspout settles an inch below the rest of the field, and the chair rocks every time somebody sits down.
Which Tremron Models This Applies To

Tremron makes this complicated in the good way: their product line runs to dozens of paver styles across the Olde Towne, Mega Olde Towne, Jakarta, River, and Stonegate families, each with its own nominal thickness, coverage per pallet, and edge profile. The bulk of what’s installed on Santa Rosa residential driveways falls into the 60mm (about 2⅜ inch) and 80mm (about 3⅛ inch) categories, with 80mm the standard for driveways because it carries vehicle load and 60mm common on patios and walkways. If you’re matching an existing field, measure the paver face and the depth, then check the pallet tag or the original invoice; the model name lives there, not on the face of the stone.
On OEM versus aftermarket: Tremron itself is a domestic manufacturer, so there’s no overseas “OEM part” question the way there is with an import car. What matters is matching the exact model, color, and thickness so a replacement section reads as continuous with the existing field. Color lots also shift between production runs, which is why we advise capping the repair at a clean line (a joint, an expansion break, a planter edge) rather than trying to blend new pavers into a five-year-old field mid-driveway. We source through Tremron’s distribution network rather than carrying stock, which means the part arrives right, not fast.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Sand washing out of the joints. Usually the polymeric sand joint failed or was never installed at spec. Once the sand goes, the pavers lose their lateral lock and start to migrate.
- Pavers rocking underfoot or under tire. A rocker is almost always a base failure, not a paver failure: the compacted aggregate below has settled or was never compacted to depth. The stone is fine; the bed beneath it isn’t.
- Water pooling in low spots after rain. Santa Rosa’s winter rain is heavy and the clay-heavy soils common in the area drain slowly. A base that wasn’t built with the right slope traps water, and trapped water finds the weak point in the field.
- Edge failure along the driveway apron. Pavers along the curb or apron start splaying outward when the edge restraint is missing or undersized. The turning load from tires is unforgiving on a loose edge.
- Efflorescence (white haze) that won’t clear. A persistent bloom on the surface often points to moisture rising from below. It’s cosmetic on a sound base, but it’s a signal worth reading.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Santa Rosa, the installed price ranges are: full paver driveway installation $7,000 – $18,000, paver patio installation $3,500 – $11,000, and driveway sealing $250 – $700 for a maintenance coat. If a repair section is the honest answer rather than a full replacement, we’ll quote it flat, with the scope written down before anyone lifts a paver.
The range is driven by square footage, base depth, whether the existing base can be rebuilt or needs full excavation, and access. A driveway that’s already torn up for another reason costs less to re-lay than a fresh install; a hillside lot in Fountaingrove with a steep apron costs more. We don’t carry parts on a truck; we source the specific Tremron model, color, and thickness, and we quote the entire job as a flat price with a written scope. No change proceeds without your signature.
DIY or Call Us?
You can safely check a lot of this yourself: probe the joint sand with a screwdriver, rock a suspect paver by hand, run a hose and watch where the water goes, and photograph the pallet tag if the original install left one. Where DIY goes wrong is the base. Pulling a paver to “fix” a rocker without recompacting the aggregate beneath it just resets the same failure in a new spot, and re-sanding a joint over a base that’s moving is throwing sand at a drainage problem. A base that isn’t rebuilt right fails again in one Santa Rosa wet season. If the field is shifting, call us and let a crew check the substrate before you spend a Saturday on the wrong repair.
FAQs

The paver itself is a decades-long product; the realistic failure point is the base and joints, not the stone. A properly built Tremron driveway with a compacted aggregate base, correct slope, and polymeric sand joints typically holds up for 20-plus years, but a base that was under-compacted or under-drained can show movement within the first few wet seasons. The failure you’ll see first in Santa Rosa is joint washout and edge splay, not a broken paver. Call (833) 842-1866 for a free estimate on the repair.
Often yes. A contained repair section bounded by a clean joint, a planter edge, or the apron can be lifted, the base recompacted, and the field re-laid and re-sanded, at far less than a full driveway number. The honest call comes down to the substrate: if only the joints and edge failed, repair is the right answer; if the base has settled across the whole field, a partial repair just moves the problem. We’ll tell you which one you’re looking at after we see the base. Call (833) 842-1866 for a free estimate.
A contained repair section is typically a one- to two-day job for a crew, depending on square footage and whether the base needs rebuilding. A full driveway re-lay on an existing base runs longer, since the tear-out, recompaction, and joint sand cure all take time; a full replacement with a new base is a multi-day project. We give you a written scope and a flat price for the whole job before work starts, so the timeline and the number are settled up front. Call (833) 842-1866 for a free estimate.
We match your exact Tremron model, color, and thickness through Tremron’s distribution network, using the pallet tag, invoice, or measurement from your existing field. The compatibility gotcha is color lot: Tremron’s production runs shift in tone, so new pavers won’t perfectly match a five-year-old field, which is why we recommend capping the repair at a clean joint rather than blending mid-field. We don’t carry stock, so the part is ordered right rather than pulled from a truck. Call (833) 842-1866 for a free estimate on your Santa Rosa project.
We also handle KraftMaid, Cambria, and Silestone products on the interior side.
Rowan Construction Group Santa Rosa works under The Haven Standard: written price before any work starts, signed change orders before any change proceeds, background-checked and uniformed technicians, a documented photo record on every visit, and the 365-Day Done Right Promise. Call (833) 842-1866 for a free estimate.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












